300X18 THRUSTER BRAKE The thruster tank is to be filled with sufficient quantity of oilas mentioned in the Thruster dimension Table. To mount the thruster on the brake, remove one side splits pins on the thruster hinge pins.15 in the base frame of brake and lever 12. Remove both pins and re-insert them after positioning the thruster on the pin holes in the base and the lever of the base Replace both split pins. Check that the thruster movement is unobstructed when the crane lever is pulled manually and the thrust rod of the thruster is free to move. Open the terminal
box cover of the thruster and connect power supply cables to the three terminals on the terminal plate inside the terminal box. Terminate the earthing lead on the earth terminal plate inside the terminal provided on the thruster or brake .Replace the terminal box cover on the terminal box. The thruster is ready for operation.
ALIGNING AND SETTING O
